UMS-54
• Four-polarity satellite signal and one terrestrial signal inputs, workable with Quad/Quattro LNB.
• One UnicableTM output with 4 SAT programs and Terr. signal.
• 13V, 18V, 13V/22KHz and 18V/22KHz power to LNB V/L, H/L, V/H and H/H input.
• 12VDC on Terr. Input to provide power for terrestrial amplifiers in the masthead amplifier or in all cascade Multiswitches, DIP SW On/Off control.
• Powered by 18VDC from external power supply.
• Maximum 4 user bands for 4 subscriber receivers.
| UMS-54 | Typical Value | Q.C. Limit | Remark | |
| Frequency Range |
Terrestrial (TER) | 47 ~ 862 MHz | ||
| Satellite (SAT) | 950 ~ 2150 MHz | |||
| Input Ports | 4xLNBs, TER, 18VDC_IN | F-Type Female Connector |
||
| Output Ports | 1 (for 4 Users) | |||
| Subscriber Gain | TER | 7 ± 2 dB | 7 ± 3 dB | |
| SAT | 13 ± 2 dB | 13 ± 3 dB | ||
| Isolation | Trunk / Trunk | 35 dB | ≧ 30 dB | |
| Switching Isolation | 35 dB | ≧ 30 dB | ||
| Return Loss | Trunk | 10 dB | ≧ 8 dB | |
| Subscriber | 8 dB | ≧ 6 dB | ||
| Max. O/P Level | TER | 104 dBμV | ≧ 100 dBμV | 60 dB IMA3 @ 50083-5 |
| SAT | 104 dBμV | ≧ 100 dBμV | 35 dB IMA3 @ 50083-3 | |
| Command from Subscriber | EN 50494 (Extension DiSEqC 1 Standard) | |||
| DC support to LNB inputs | 13V, 18V and 22KHz | |||
| User Band (0 ~ 3) | 1210 / 1420 / 1680 / 2040 MHz | |||
| PIN Code for MDU Installation | 6F / DE / 7F / EE | |||
| Power consumption without LNB and Terr. | 200mA Max. | @ 18VDC_IN | ||
| External Switching Mode Power Supply | 100 ~ 240 VAC / 47 ~ 63 Hz, 18V/1.2A | Wall Mount | ||
| Dimension without PSU | 105mm (L) x 88mm (W) x 34mm (H) | |||
| Weight | 190 g | |||
| Working Temperature | -20 ~ +55 ℃ | |||
